PARTS
CATEGORIES
CATEGORIES
Customer Service: (800) 851-3014
Air Conditioning Compressor Warranty
All compressors have a 1 year warranty from date of installation.
Packing slip & copy of work order showing these steps were followed must be provided before warranty will be considered.
FAILURE TO FOLLOW THESE 12 STEPS WHEN INSTALLING THE COMPRESSOR WILL VOID YOUR WARRANTY
Packing slip & copy of work order showing these steps were followed must be provided before warranty will be considered.
FAILURE TO FOLLOW THESE 12 STEPS WHEN INSTALLING THE COMPRESSOR WILL VOID YOUR WARRANTY
US Farm Parts and the parts contained herein are not sponsored, affiliated, nor otherwise connected in any way with the equipment manufacturers named in this web site. The use of the original manufacturer's part numbers are for reference purposes only. The parts offered are not original manufacturer's parts.
US Farm Parts is located in Northern Illinois.
Orders are shipped from a network of warehouses.
Contact US Farm Parts at: 800-851-3014
Orders are shipped from a network of warehouses.
Contact US Farm Parts at: 800-851-3014
PROTECT YOUR INVESTMENT.
DO IT RIGHT THE FIRST TIME.
THERE ARE NO SHORT CUTS TO A/C REPAIR!
DO IT RIGHT THE FIRST TIME.
THERE ARE NO SHORT CUTS TO A/C REPAIR!
1. MUST clean A/C system with an approved flush, using an approved flushing method (R141b and Dura Flush are approved).
If a manufacturer’s approved flushing solvent is not available, an in-line filter MUST be installed per these instructions.
If a manufacturer’s approved flushing solvent is not available, an in-line filter MUST be installed per these instructions.
2. MUST replace filter drier or accumulator drier.
3. MUST replace orifice tube or liquid line that contains orifice tube (if applicable).
4. Replace thermostatic expansion valve and clean inlet screen (if applicable).
5. Check for proper airflow through cooling fins of condenser and radiator (condenser may need to be replaced).
6. Check for proper fan clutch or electric fan operation.
7. Check compressor cluch air gap before installation (refer to OEM or compressor manufacturer’s specs).
8. MUST add correct type and amount of refrigerant oil (refer to OEM or compressor manufacturer’s specs).
9. After hose assemblies are attached, turn compressor shaft (not just the clutch pulley) a minimum of 10 times to clear oil from compressor (a spanner wrench may be required).
10. Check compressor clutch electrical circuit for proper voltage (use either OEM or compressor manufacturer’s specs).
11. Use ONLY R12 or R134a refrigerant.
12. Evacuate entire A/C system for minimum of 45 minutes if the temperature is above 80 degrees (60 minutes for Dual Air System or if temperature is below 80 degrees).
US Farm Parts
Phone: (800) 851-3014
Mon - Fri 7:30AM - 4:00PM
Sat 7:30AM - Noon
Central Time
Phone: (800) 851-3014
Mon - Fri 7:30AM - 4:00PM
Sat 7:30AM - Noon
Central Time